SAGMOTO X1s 8x4 Dump Truck for Sale
The SAGMOTO X1s 8x4 dump truck shown here is a verified left-hand-drive configuration for heavier construction and material-haul enquiries. Its supplied specification includes a 520 HP Cummins engine, FAST transmission and U-shape tipper body. An 8x4 layout should be assessed with the material density, body and vehicle weight, haul-road condition, gradients, loading cycle and safe tipping area. Buyers should provide those operating details, the destination and order quantity before the available configuration, legal limits and export quotation are confirmed in writing.
View Verified Specification Request a Quote
Verified SAGMOTO X1s 8x4 configuration
Configuration summary: The supplied document identifies model SX3313L5M52J3460 as a left-hand-drive 8x4 dump truck with a 520 HP Cummins M13E3 520 engine, FAST 12JSDX240T transmission and Euro III emissions.
| Model | SX3313L5M52J3460 |
|---|---|
| Drive / steering | 8x4 / left-hand drive |
| Engine | Cummins M13E3 520, 520 HP, 12.5 L |
| Emission standard | Euro III |
| Transmission | FAST 12JSDX240T + QH50 + FHB400 |
| Wheelbase | 1950 + 3425 + 1400 mm |
| Maximum speed | 80 km/h |
| Tires | 12.00R24 / 20PR |
| Fuel tank | 400 L aluminum alloy |
| Tipper body | U-shape, 7400 x 2300 x 1500 mm; 10 mm floor, 8 mm sides; electric tarpaulin |
Scope of this data: The table describes the supplied configuration, not every available X1s 8x4. Availability, price, legal payload, axle limits, homologation, emissions, registration and the final signed specification are confirmed for each destination and order.
8x4 selection for heavy construction and haul work
Material and body matching
Give the material type and approximate density, loading method and desired body. The complete body and chassis weight must be reviewed before a payload or operating limit is discussed.
Mine and construction roads
Describe gradients, loose or compacted surfaces, potholes, water, dust and the proportion of public-road travel. These conditions affect configuration review and operating planning.
Cycle and tipping conditions
Provide haul distance, trips per shift, loading time, unloading area, overhead clearance and ground stability. A stable tipping location is an operational requirement.
Why body and vehicle weight must be reviewed together
An 8x4 chassis does not create one universal payload figure. The body material, dimensions, floor and side thickness, hydraulic system, optional equipment and fuel all contribute to vehicle weight. The transported material and destination axle limits then affect the permissible operating plan. For an accurate quotation, the body request should be reviewed with the full chassis configuration rather than specified independently.
| Buyer decision | Information to send | Quotation check |
|---|---|---|
| Material duty | Material, density, abrasiveness, moisture and loading equipment. | Body style and protection requirements are confirmed against the duty. |
| Road duty | Public-road share, mine or site surface, gradients, altitude and daily distance. | Available drivetrain, tires and supporting equipment are reviewed. |
| Body request | Required dimensions, tailgate, tarpaulin and tipping method. | Body and complete-vehicle compatibility are confirmed before price. |
| Destination | Country, port, steering side, emission requirement and known legal limits. | Market-specific availability and documentation are checked. |
When to compare the X1s 6x4
The X1s 8x4 should not be selected only because it has more axles or a longer supplied body. Where site access, turning space, transport cycle or the intended body requirement points to a different layout, compare the SAGMOTO X1s 6x4 dump truck. Andy can review both configurations after the actual material, route and destination are supplied.
Information needed for an X1s 8x4 quotation
Project duty
Material and density, loader or excavator, haul distance, gradients, road surface, trips per day and tipping conditions.
Vehicle request
8x4 preference, required body, steering side, emission requirement, optional equipment and any component standardization need.
Export request
Destination country and port, quantity, inspection request and preferred EXW, FOB or CIF quotation basis.
Related X1S 8x4 buying guides
Peru mining procurement
Material, haul road, 8x4 selection and RFQ questions for mining and construction buyers.
Read the Peru guideColombia mining and construction
A separate guide focused on project duty, road conditions and quotation preparation.
Read the Colombia guideChile contractor planning
Review another heavy-construction procurement scenario without treating it as a customer case.
Read the Chile guideSAGMOTO X1s 8x4 buyer FAQs
What does the verified SAGMOTO X1s 8x4 specification include?
The supplied specification identifies model SX3313L5M52J3460 with 8x4 drive, left-hand steering, a Cummins M13E3 520 engine rated at 520 HP, FAST 12JSDX240T transmission and Euro III emissions. The full supplied configuration is shown on this page.
What operating details are needed for an X1s 8x4 quotation?
Provide the material and approximate density, loading method, desired body, haul-road surface, gradients, trip distance, tipping conditions, destination country and port, quantity and known emission or registration requirements.
Does the displayed X1s 8x4 specification define legal payload?
No. The page presents one supplied vehicle configuration. Legal payload and axle limits depend on the complete vehicle, body, destination rules and registration basis, and must be confirmed before order.
Request an X1s 8x4 configuration quotation
Send the material, haul road, body request, destination, port and quantity. Andy will confirm which 8x4 configuration can be quoted.
Open RFQWhatsApp Andy
