SAGMOTO X1s 6x4 Dump Truck for Sale
The SAGMOTO X1s 6x4 dump truck shown here is a verified left-hand-drive configuration for construction and bulk-material transport enquiries. Its supplied specification includes a 420 HP Cummins engine, FAST transmission and U-shape tipper body. Suitability still depends on the material, loading method, haul distance, gradients, road or job-site surface and destination requirements. Buyers should provide these operating details, the required quantity and destination port so the available configuration, legal requirements and quotation basis can be confirmed in writing before order.
View Verified Specification Request a Quote
Verified SAGMOTO X1s 6x4 configuration
Configuration summary: The supplied document identifies model SX3253L5M42J3840 as a left-hand-drive 6x4 dump truck with a 420 HP Cummins ISME420 30 engine, FAST 12JSD200T-B transmission and Euro III emissions.
| Model | SX3253L5M42J3840 |
|---|---|
| Drive / steering | 6x4 / left-hand drive |
| Engine | Cummins ISME420 30 (JACOB), 420 HP, 10.8 L |
| Emission standard | Euro III |
| Transmission | FAST 12JSD200T-B + QH50 + FHB400 |
| Wheelbase | 3775 + 1400 mm |
| Maximum speed | 80 km/h |
| Tires | 12.00R24 / 20PR |
| Fuel tank | 400 L aluminum alloy |
| Tipper body | U-shape, 5600 x 2300 x 1500 mm; 10 mm floor, 8 mm sides; electric tarpaulin |
Scope of this data: The table describes the supplied configuration, not every available X1s 6x4. Availability, price, legal payload, homologation, emissions, registration and the final signed specification are confirmed for each destination and order.
Where a 6x4 dump truck can fit the job
Construction material transport
For sand, aggregate, soil or other project materials, confirm material density, loading equipment, haul distance and unloading space before choosing the body and chassis configuration.
Mixed road and job-site work
Describe the paved-road share, rough sections, gradients, ground condition and turning access. These details matter more than selecting a model from power alone.
Contractor fleet use
Fleet buyers should provide daily cycles, quantity, maintenance capability and any component standardization preference so the quotation can be compared consistently.
Body, material and tipping questions
| Decision | What the buyer should provide | What must be confirmed |
|---|---|---|
| Material | Material name, approximate density, abrasiveness and whether it is wet or dry. | Suitable body style, floor and side requirements depend on the actual material and loading method. |
| Loading | Excavator or loader size, loading height and risk of impact during loading. | Body protection and dimensions should be reviewed with the operating method. |
| Tipping | Ground stability, overhead clearance, unloading area and desired tailgate operation. | Lifting and body details must be agreed in the final specification. |
| Haul cycle | One-way distance, trips per day, gradients, road surface and expected speed. | Available drivetrain, tires and supporting equipment depend on the full duty cycle. |
Choose 6x4 or review the X1s 8x4
A 6x4 enquiry should be evaluated when route access, maneuvering space and the intended transport cycle support that layout. Buyers considering a longer body or a different load-distribution requirement can also review the SAGMOTO X1s 8x4 dump truck. The decision should be based on the complete vehicle, body, material and destination limits rather than axle count alone.
Prepare a complete X1s 6x4 quotation request
Truck and material
State the 6x4 preference, material, body style or dimensions, loading method and target operating requirement.
Route and destination
Provide road surface, gradients, daily distance, destination country and port, steering side and known emission requirement.
Commercial request
Include quantity, inspection request and preferred EXW, FOB or CIF basis. Final price follows configuration review.
Related X1S 6x4 buying guides
Costa Rica contractor planning
Route access, material, 6x4 suitability and RFQ details for contractor fleets.
Read the Costa Rica guideDominican Republic contractor use
A separate procurement scenario focused on contractor operating conditions and quotation inputs.
Read the Dominican Republic guideX1s 6x4 quotation guide
Review the information needed to compare a configuration-based export quotation.
Read the quotation guideSAGMOTO X1s 6x4 buyer FAQs
What does the verified SAGMOTO X1s 6x4 specification include?
The supplied specification identifies model SX3253L5M42J3840 with 6x4 drive, left-hand steering, a Cummins ISME420 30 engine rated at 420 HP, FAST 12JSD200T-B transmission and Euro III emissions. The full supplied configuration is shown on this page.
What should a buyer confirm before requesting a 6x4 dump truck quote?
Provide the material type, desired body style and dimensions, loading method, haul distance, gradients, road or site surface, destination country and port, quantity and any known emission or registration requirements.
Is the displayed X1s 6x4 configuration available for every country?
Not automatically. The displayed data describes one supplied configuration. Availability, legal weights, homologation, emissions, registration and final specification must be confirmed for the destination before quotation and order.
Request an X1s 6x4 configuration quotation
Send the material, route, body requirement, destination, port and quantity. Andy will confirm which configuration can be quoted.
Open RFQWhatsApp Andy
